Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
- Coupling and power shafts
   + Coupling
   + Driveshaft
   + Power shafts of wheels
   - Differential
      Dismantling and assembly of differential
      Dismantling and assembly of a reducer of the main transfer and adjustment of gaps of gear wheels
      Determination of thickness of adjusting laying and its installation in the reducer case
      Check and adjustment of a gap of a flange
      Dismantling and assembly of differential with automatic blocking
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment












Check and adjustment of a gap of a flange

Check and adjustment of a gap between a flange 33 and a conic gear wheel of a power shaft 17 by means of a lock ring


Check a gap between a flange (33) and a conic gear wheel of a power shaft (17). If it is necessary, establish a lock ring (30a) more thinly or more thickly. Thickness of a lock ring changes from 1.4 mm to 2.7 mm with a step of 0.05 mm. A gap between a flange and the case of differential: 0.03 - 0.3 mm.