Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures when carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Damages of a windshield as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of windscreen washer of a windshield
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windshield
      Removal and installation of the lever of a back screen wiper
      Removal and installation of a catchment basin
      Removal and installation of a cowl
      Removal and installation of facing of a cowl
      Adjustment of a cowl
      Removal and installation of the lock of a cowl
      Drive cable detachment from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and installation of a bumper
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Adjustment of a door
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and installation of a trunk lid
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and door of a back
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + Equipment of salon
+ Onboard electric equipment












Removal and installation of facing of a trunk lid

Sedan

Removal

 PERFORMANCE ORDER

1. Open a luggage carrier and take out the warning sign from the holder.
2. Take out razzhimny clips from facing on a trunk lid. For this purpose hook a clip pin a plastic wedge, for example, of HAZET 1965-20 and take out it. The pin can be taken out differently, for example, having wrapped it a strong thread, and having pulled for a thread.

3. Take out clips (1) from facing on trunk lid wings.

4. Disconnect lock levels (2) and pull facing of wings back.

5. Turn out 2 screws of fastening.

6. Insert the narrow screw-driver or a knife into a gap in an aperture for the handle, press (arrow 3) up and separate a slip (2) from a trunk lid.
7. Disconnect a level (4) the screw-driver from a trunk lid, at the same time shift the holder of the warning sign (arrow 5) to the left and remove from a trunk lid.
8. Disconnect facing from a trunk lid and remove it.


Installation

 PERFORMANCE ORDER

1. Establish facing on a trunk lid, insert it between facing of wings and fix by clips.
2. Fix facing of wings by clips and lock levels.
3. Establish the holder of the warning sign on a trunk lid and displace to the right so that the level was recorded.
4. Record a slip on a trunk lid and fix it. Insert the warning sign in the holder.
5. Close a trunk lid and check correctness of its situation. If it is necessary, adjust a rubber emphasis by their rotation so that the cover was correctly closed. For this purpose lead round an emphasis above chalk, close a cover and on a print of chalk check whether a rubber emphasis adjoins.