Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures when carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Damages of a windshield as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of windscreen washer of a windshield
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windshield
      Removal and installation of the lever of a back screen wiper
      Removal and installation of a catchment basin
      Removal and installation of a cowl
      Removal and installation of facing of a cowl
      Adjustment of a cowl
      Removal and installation of the lock of a cowl
      Drive cable detachment from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and installation of a bumper
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Adjustment of a door
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and installation of a trunk lid
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and door of a back
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + Equipment of salon
+ Onboard electric equipment












Removal and installation of facing of a door of a back

Versatile person

Removal

The designations "oben" (top) and "unten" (bottom) belong to a closed position of a door of a back.


 PERFORMANCE ORDER

1. Open a back door.

2. Take out a clip from openings on a back cover.


3. Enter a plastic wedge, for example, HAZET 1965-20 in the middle of a gap (the shooter on an illustration) between side and lower facings of a frame and disconnect facing elements from connections of clips.

Facing elements in this place are stuck together among themselves.

4. Partially separate the lower facing of a frame (2) from facing of a door of a back (3), having strongly pulled for it, and applying a plastic wedge.
5. Pull a plastic hook from holders of a clip on facing of a door of a back. For this purpose enter the screw-driver into a gap between facing of a door and facing of a frame. Disconnect a plastic hook blow of the hammer to the screw-driver.

The plastic hook can break at the same time.


6. Undertake a hand between facing of a door of a back and a door and pull strong breakthrough consistently 6 clips (arrows on an illustration). If it is necessary, use a plastic wedge.

7. Remove facing (1) together with side facing of a frame (2).

The lower part of side facing has to be taken out from side facing at a back window by the movement from a window aside.


8. Disconnect side facing (1) at a back window by means of a plastic wedge from 5 holders of a clip (2). (3) – top facing of a back window.

9. Disconnect 3 plastic levels (3) from connections (3) and separate side facing of a back window (4) from the top facing of a window (1).

10. Disconnect the top facing of a back window (1) strong breakthrough from 6 holders of clips (an arrow on an illustration) and remove it.


Installation

 PERFORMANCE ORDER

1. Pull thorns of metal holders of the top facing of a back window from plastic pads on facing and press into openings at back doors.
2. Establish into place the top and left facings of a back window.
3. Insert the right facing of a back window at the right facing and record.
4. Connect facing of a back window to side facing of a frame on a back door so that side facing of a frame was included into side facing at a back window. Press clips into openings.
5. Establish facing of a frame on the lower edge of a door of a back. At the same time connect side facing of a frame to lower and join plastic hooks with facing of a door of a back.
6. Press clips into openings on a back door.