Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment












Removal and installation of facing are permanent C

Sedan

Removal

 PERFORMANCE ORDER

1. Release a back seat and cast away it forward.
2. Turn off a bolt of fastening of a seat belt under a seat.
3. Disconnect a fringing along a rack of C.

4. Take out a SRS cover (1) from facing and turn out the bolt which is under it.

5. Insert a plastic wedge into a gap between facing of a rack of C and facing of a roof and disconnect facing.
6. Disconnect facing at brackets (2) from a rack of C (an arrow on an illustration) and remove it from the directing shelf forward.
7. Carry out a seat belt through a groove in facing.


Installation

 PERFORMANCE ORDER

1. Installation is carried out in the sequence, the return to removal.
2. Fix a seat belt under a back seat the moment of 30 Nanometers.


Versatile person

Removal

 PERFORMANCE ORDER

1. Release a back seat and cast away it forward.
2. Remove a side pillow of a back of a back seat as it is described in the Section Removal and installation of a back seat.
3. Remove a fringing along a rack of C.
4. Uncover and disconnect a bracket of turn of a belt at a rack of C.
5. remove facing in a cargo compartment, address appropriate section.

6. Disconnect facing of a rack of C of the holder of a bracket (2).

7. Take out a seat belt from the facing directing a belt.


Installation

 PERFORMANCE ORDER

1. Installation is carried out in the sequence, the return to removal.
2. Fix a bracket of turn of a belt on a rack by the C moment of 30 Nanometers.