Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment












Removal and installation of a razzhimny clip

Razzhimna the clip consists of actually clip and the plastic screw (1) or a pin (2). The plastic screw is rolled in an opening of a clip or the pin is pressed into a clip therefore pads of a clip are unclenched.


Many covers and facings from plastic fasten by means of razzhimny clips.

Removal

 PERFORMANCE ORDER

1 Plastic screw: By means of the small screw-driver turn out the plastic screw a little and take out a clip for the screw from an opening.
2 Razzhimna pin: By means of the small screw-driver or nails take out a pin (2) from a clip a little.


Installation

 PERFORMANCE ORDER

1. Plastic screw: Insert a clip with the turned-out plastic screw into an opening and screw the screw.
2. Razzhimna pin: Insert a clip with the extended pin into an opening and press a pin.
3. Now the clip is recorded.