W203 since 2000 of release
Repair and operation of the car
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
- Routine maintenance
Indicator of term of approach of planned maintenance (ASSYST)
Schedule of routine maintenance
General information on control
Check of levels of liquids, control of leaks
Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
Replacement of motive oil and oil filter
Checks of the brake system. Adjustment of the parking brake
Check of fuel system
Check of a state and replacement of hoses of a motive compartment, localization of leaks
Check of a condition of ridge belts of the streaming drive of auxiliary units
Check of functioning of the cooling system and frost resistance of cooling liquid. Liquid replacement
Check of a condition of system of production of the fulfilled gases
Check of level of oil of automatic transmission
Visual control of a box of gear shifting on oil leak
Check of a state component of a suspension bracket and steering
Check of a condition of protective covers of power shafts
Check of level of liquid of system of hydrostrengthening of a wheel
Check of level of liquid of system of adjustment of clearance
Check of the air conditioning system
Cleaning of the mechanism of the movable panel of the hatch of a roof
Visual control of a seat belt and block of a safety cushion
Check of operability of headlights and horn
Check of a state, adjustment and replacement of brushes of screen wipers
Check of a condition of the battery, care of it and charging
Replacement of the battery of system of an emergency call of Tele-Aid
Replacement of an element of the filter of air of salon / coal filter of purification of air
Check, cleaning and lubricant of the coupling device
Replacement of brake fluid
Check of the elastic coupling of the driveshaft
Check and replacement of spark plugs. Check of a condition of high-voltage wires
Replacement of an element of the air filter of the engine
Replacement of the fuel filter
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
Replacement of brake fluidIt will be necessary for carrying out work for you:
· A cap key for an otvorachivaniye of the union of removal of air.
· A transparent plastic hose with an internal diameter of 6 mm and capacity for collecting brake fluid.
· Necessary amount of the brake fluid meeting the specification.
Brake fluid through a time of brake hoses and an air vent of the tank absorbs moisture. Thereof liquid boiling temperature in use decreases. At big load of brakes it can lead even to steam formation that reduces efficiency of action of brakes.
Brake fluid owes each 2 years, it is desirable in the spring, to be replaced with new. At the frequent movement in the mountain area, liquid needs to be replaced more often.
On HUNDRED air from the brake system, as a rule, is removed on the special device. However it can be done also without use of the specified device. At the same time the brake system is pumped over by a brake pedal. For this purpose participation of the assistant is required.
If in the course of removal of air from the brake system liquid level sharply decreases, then there is a suction of the air getting to the pump ABS. In this case removal of air needs to be made on HUNDRED with use of the special device. When replacing any brake hose air needs also to be removed from system on HUNDRED. Until it is made, it is impossible to use the car.
Sequence of removal of air:
1. The support is back right;
2. The support is back left;
3. The support is forward right;
4. The support is forward left.
Pay attention to remarks according to safety measures at the treatment of brake fluid, address Chapter 9 materials.