Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + The automated box of gear shifting 716.6
   - Automatic transmission 722.6
      Search of malfunctions - the general information
      Problems of the block of electronic control and the operating signals
      Removal and the AT installation with the hydrotransformer
      The AT electrohydraulic control unit (AT is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Case of transmission and hydrotransformer
      Multidisk brakes of B2, B3 and gear wheel of blocking at "Parking"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of a multidisk brake B1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of a multidisk brake of B1
      Dismantling and assembly of a multidisk brake of B2
      Dismantling and assembly of an output shaft with the central and back block of planetary gear wheels
      Removal and installation of multidisk couplings K1, K2 and K3
      Dismantling and assembly of coupling of K1
      Dismantling and assembly of the leading shaft with coupling by K2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling of K3
      The blocking mechanism at "parking"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment












Removal and the AT installation with the hydrotransformer

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Pick up the maslozalivny phone (61) from the engine.
3. Turn off a drain stopper (4) from the pallet of transmission and merge gearbox oil.
4. Turn off a drain stopper (9) from the hydrotransformer and merge gearbox oil.
5. Remove a guard (62) and disconnect the 13-contact socket (26).
6. Disconnect a cable (80) of inclusion of blocking at the parking.
7. Turn off bolts (95) of fastening of the hydrotransformer to a drive plate. Then uncover the hydrotransformer (81).
8. Turn off the left and right oil pipelines (49) from the oil heater.
9. Remove draft of gear shifting (63), having disconnected for this purpose a clamp.
10. Remove an arm (64) fastenings of an exhaust pipe.
11. Disconnect final system (94).
12. Remove a fan casing from a radiator.
13. Turn off a back arm of the engine with a support (65).
14. Unscrew the driveshaft (66).
15. Disconnect a connection wire on "weight" (46) from transmission.
16. Turn off bolts of fastening of transmission to the block of cylinders and remove it down at an angle.
17. Remove the hydrotransformer.


Installation

Installation is carried out as it should be, the return to removal.